CHINESE

  • A Simple Understanding of What are the Important Indicators of Adsorbents (below)

News

A Simple Understanding of What are the Important Indicators of Adsorbents (below)

Loss on ignition

The adsorption capacity of the remaining and regenerated adsorbent is called the burn-off loss in activated alumina and the water content in molecular sieve. In molecular sieves, it is called water content. We routinely call it water. The smaller this value is, the less water the same weight of adsorbent has, the more active ingredients it has and the higher its application capacity.In general, JOOZEO adsorbent has high and stable adsorption performance, high efficiency adsorption capacity, large specific surface area and pore size structure, as well as high institutional strength and easy regeneration.

Explanation of crush  strength

Crushing strength is the limit of strength when external pressure is applied, which refers to the hardness of the adsorbent itself. The higher the strength, the stronger the impact resistance, the less likely to fall powder, and the less likely to produce cracked balls and pulverization due to the impact of airflow in the adsorption work of the suction dryer.

Attrition rate analyze

Abrasion refers to the degree of abrasion when the adsorbent is subjected to external impact or mutual grinding. For example, the standard requires the abrasion rate of activated alumina to be less than 0.3%. Generally speaking, the dust of activated alumina is inevitable, but at present, the abrasion rate of JIUZHOU is generally around 0.2%, which greatly reduces the production abrasion rate to a certain extent.

Bulk Density

It is the reference specific index when we calculate the purchase quantity for our customers. JIUZHOU’s stacking density is measured by the mass per unit volume in the container after filling tightly. For the case that the machine on site is not filled twice or filled by vibration, the idle value should be slightly subtracted from the value of the bulk density, for example, the bulk density of activated alumina is 0. 72g/ml, which can generally be calculated according to 0. 70g/ml.

https://www.joozeo.com/technical-support/


Post time: Aug-30-2022

Send your message to us: