Carbon Molecular Sieve JZ-CMS8N
Description
JZ-CMS8N is a new kind of non-polar adsorbent, designed for the enrichment of nitrogen from air, and has a high adsorption capacity from oxygen. With its characteristic of high efficiency, low air consumption and high purity nitrogen capacity. JZ-CMS8N is a material containing tiny pores of a precise and uniform size that is used as an adsorbent for gases. When the pressure is high enough, the oxygen molecules, which pass through the pores of CMS much faster than the nitrogen molecules, are adsorbed, while the coming out nitrogen molecules will be enriched in gas phase. The enriched oxygen air, adsorbed by the CMS, will be released by reducing the pressure. Then the CMS is regenerated and ready for another cycle of producing nitrogen enriched air.
For one ton of CMS8N,we can get 280 m3 of Nitrogen with purity 99.5% per hour under same working condition.
Application
Used to separate N2 and O2 in the air in the PSA system.
Nitrogen generator use carbon molecular sieve (CMS) as adsorbent. Usually use two adsorption towers in parallel, control the inlet pneumatic valve automatically operated by the inlet PLC, alternately pressurized adsorption and decompressing regeneration, complete nitrogen and oxygen separation, to obtain the required high purity nitrogen
Specification
| Type | Unit | Data |
| Diameter size | mm | 1.0 |
| Bulk Density | g/L | 620-700 |
| Crush Strength | N/Piece | ≥40 |
Technical Data
|
Type |
Purity（%） |
Productivity(Nm3/h.t) |
Air / N2 |
|
JZ-CMS8N |
99.5 |
280 |
2.3 |
|
99.9 |
190 |
3.4 |
|
|
99.99 |
135 |
4.5 |
|
|
99.999 |
90 |
6.4 |
|
|
Testing size |
Testing Temperature |
Adsorption Pressure |
Adsorption Time |
|
0.9-1.1 |
≦20℃ |
0.75-0.8Mpa |
2*45s |
Standard Package
20kg ; 40kg ; 137kg / plastic drum
Attention
The product as desiccant cannot be exposed in the open air and should be stored in dry condition with air-proof package.